Inserter for self-clinching fastener
The PEMSERTERR Series 4R press is totally pneumatic providing short cycle time for increased productivity and 53.4 kN / 6 tons of force and a 45.7 cm / 18” throat depth which provides clearance for a variety of chassis configurations. It is designed to install self-clinching fasteners in size M2 / #0 thru M10 / 3/8” in steel, and sizes up to M12 / 1/2” in aluminum panels or circuit boards.
| Features and Benefits |
| Insertion force adjustable from 1.8 to 53.4 kN / 400 to 12,000 lbs. |
| Pneumatic power for speed, consistency, and simple operation. Requires shop air only. |
| Integral point-of-operation safety. |
| Adjustable positive ram stop. |
| Large parts tray with dividers. |
| Rapid tooling changeover, perfect for short production runs. |
| Laser pointer, stroke counter, |
|
■ Specifications
| Ram Force | 4.5 to 53.4 kN |
| Pressure System Type | Pneumatic / Lever |
| Air Requirements | 6-7 bar / 90-100 psi ( 12 mm in dia. minimum line flow) |
| Throat Depth | 45.70 cm |
| Height | 167.60 cm |
| Width | 43.20 cm |
| Weight |
259.00 kg 372.00 kg ( with Cabinet) |
| Cabinet Dimensions L x W x H | 74.00 x 66.00 x 76.00 cm |
■ Installation Option
|
|
| Bottom Mount Reverse Flange Anvil Holder | Top Mount Reverse Flange Anvil Holder includes punch and anvil |
When a workpiece flange and fastener location prohibits the use of standard tooling, the use of top or bottom mount, reverse flange anvil holders will often solve the installation problem.
|
| Optional QX4 Manual Tooling for Series 4R and Series LT/4R Presses |
The PEMSERTERR QX4 manual Turret Tool System provides an efficient method to quickly change between four different anvil tools. The one-handed operation of this tool allows an operator to install four different types and/or sizes of fasteners with one set-up.