Headed SG Lock(Heat Staking Inserts)

Headed SG Lock This insert nut provides a larger contact area for mounting objects and advantageous for locations where bolts are frequently detached such as terminals.
Major insertion methods Heat Staking Insertion, Ultrasonic Insertion, High-frequency Insertion
Material Brass (C3604), Aluminum Alloy (made-to-order), Stainless Steel (standard product or made-to-order)
Plastic Thermoplastics

■ Features

・ Knurling in alternate directions provides high strength
・ Guide for assisting manual insertion
・ Most common post-insertion nuts
・ Full compliance with RoHS Directive

■ Dimensions

Headed SG Lock Dimensional Drawing
Rim SG Lock Dimensional Drawing
Part Number Thread and Pitch A B C D E Pilot Hole Dimension on Plastic (Reference)
SGH3.6-M2-4.0 M2×0.4 3.60 4.00 3.10 4.75 0.55 φ3.2
SGH4.6-M3-5.7 M3×0.5 4.60 5.70 3.90 5.50 0.60 φ4.0
SGH6.3-M4-8.1 M4×0.7 6.26 8.10 5.54 7.10 0.90 φ5.6
SGH7.1-M5-9.5 M5×0.8 7.05 9.50 6.34 7.90 1.10 φ6.4
SGH8.7-M6-12.8-SF M6×1.0 8.70 12.80 7.94 9.50 1.30 φ8.0
SGH8.7-M6-12.8 M6×1.0 8.70 12.80 7.94 12.00 1.30 φ8.0
SGH10.3-M8-12.8 M8×1.25 10.30 12.80 9.54 11.10 1.30 φ9.6
※Standard parts unit:mm

■  Headed SG lock Performance data (Reference)

Part Number ABS MC Nylon PP
Pull-out (N) Torque-out(N・m) Pull-out (N) Torque-out(N・m) Pull-out (N) Torque-out(N・m)
SGH3.6-M2-4.0 609 1.00 790 1.00 367 0.86
SGH4.6-M3-5.7 1,142 3.08 1,437 3.22 759 2.40
SGH6.3-M4-8.1 2,794 6.56 2,250 5.56 1,536 4.22
SGH7.1-M5-9.5 3,051 14.30 3,257 15.10 1,726 10.50
SGH8.7-M6-12.8 4,736 19.60 5,132 19.70 2,324 14.60
Part Number POM Acryl PVC
Pull-out (N) Torque-out(N・m) Pull-out(N) Torque-out(N・m) Pull-out (N) Torque-out(N・m)
SGH3.6-M2-4.0 678 1.00 911 1.00 485 1.00
SGH4.6-M3-5.7 1,099 3.00 1,498 3.00 1,178 3.16
SGH6.3-M4-8.1 2,905 4.80 4,158 6.66 2,850 5.48
SGH7.1-M5-9.5 3,447 15.30 4,225 19.17 4,059 16.40
SGH8.7-M6-12.8 4,277 22.80 4,616 26.75 5,592 26.30
※The above data are experimental results of Micro Fasteners. They are not a guarantee of the strength of our products.
1N≒0.098kgf
1N-m≒9.8kgf-cm

■ NOTE

・ Please contact us if you need Pb-free material for environmental reasons.
・ Pilot hole diameters are for reference only.The diameter should be determined by testing before use.
・ Please contact us about the knurling design when SG Locks are used for polycarbonate (PC) and other materials which are sensitive to residual stress.
・ The diameter of the pilot hole for the mounting object should be smaller than the outer diameter of the insert (Dimension D).
・ When inserts are tightened by screws, choose the screw length so that screws do not reach the bottom of insert pilot holes.
・ The specifications are subject to change without notice.
・ Please contact us if you have any other questions.